Prusa · 3D printers
A WiFi USB stick for your Prusa 3D printer.
Prints .bgcode or .gcode from a FAT32 MBR drive and saves crash dumps to it. WiFiDrive stays in its USB port, looks to the Prusa like any stick, and gets your prints there over your own WiFi.
- Works as it ships: the Prusa reads it as is.
- Print a file straight from it, as from any stick.
- If your Prusa won’t read it, a full refund within 30 days.
Models
Every Prusa 3D printer.
WiFiDrive goes in its USB port on every one.
CORE One
- Prusa CORE One+ (Gen 2)
- Prusa CORE One+ (Gen 2) INDX 8-Tool
- Prusa CORE One L+
- Prusa CORE One L+ INDX 8-Tool
- Prusa CORE One
MK4
- Original Prusa MK4S
- Original Prusa MK4
XL
- Original Prusa XL+
- Original Prusa XL
MINI
- Original Prusa MINI+
- Original Prusa MINI
MK3.9
- Original Prusa MK3.9S
- Original Prusa MK3.9
MK3.5
- Original Prusa MK3.5S
- Original Prusa MK3.5
Pro
- Prusa Pro HT90
SL1/SL1S
- Original Prusa SL1S SPEED
- Original Prusa SL1
The stick
What a Prusa asks of it.
- Loads a fileA print starts from a sliced file on the drive, chosen on the printer; the SL1S SPEED copies its .sl1s project into internal memory first
- File systemFAT32 on an MBR partition table; exFAT and GPT are not read
- SizeNo upper limit; 8-16 GB is more than enough
- File types.bgcode (firmware 5.1.0 or later on MINI, MK4, XL) or .gcode; .sl1s on the SL1S SPEED; firmware as a .bbf file in the root, not in a folder
- Writes backCrash dumps (Settings > System > Save Crash Dump); SL1/SL1S logs as a .txt.gz file; the SL1S stores files downloaded from Prusa Connect on the drive
- WiFiDrive’s layoutThe one it ships with
- Sourceshelp.prusa3d.com, help.prusa3d.com (2), help.prusa3d.com (3), help.prusa3d.com (4), help.prusa3d.com (5)
Will it work with your Prusa?
If your Prusa reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.