Fanuc · Wire EDM
A WiFi USB stick for your Fanuc wire EDM.
The 31i-WB control reads programs from a USB stick or a CF card and saves them to it. WiFiDrive stays in its USB port, looks to the Fanuc like any stick, and gets your programs there over your own WiFi.
- Works as it ships: the Fanuc reads it as is.
- Load a program from it as from any stick.
- If your Fanuc won’t read it, a full refund within 30 days.
Models
Every Fanuc wire EDM.
WiFiDrive goes in its USB port on every one.
ROBOCUT α-CiC series
- α-C400iC
- α-C600iC
- α-C800iC
ROBOCUT α-CiA series
- α-C400iA
- α-C600iA
The stick
What a Fanuc asks of it.
- Loads a programPrograms or data are input or saved on USB memory sticks or CF cards, or over Ethernet
- ControlFANUC Series 31i-WB; 4 MB program memory on the α-CiA, more on flash and USB drives; 8 MB on the α-C400iC
- Current seriesThe α-CiC brochure lists a USB interface beside Ethernet
- WiFiDrive’s layoutThe one it ships with
- Sourcesfanucamerica.com, fanuc.co.jp, mcclaintool.com (dealer), methodsmachine.com (snippet)
Will it work with your Fanuc?
If your Fanuc reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.