Mitsubishi Electric · CNC controls
A WiFi USB stick for your Mitsubishi Electric control.
M800 and M80 controls run a program straight from a stick in the display's front port. WiFiDrive stays in its USB port, looks to the Mitsubishi Electric like any stick, and gets your programs there over your own WiFi.
- Works as it ships: the Mitsubishi Electric reads it as is.
- Run a program straight from it, as from any stick.
- If your Mitsubishi Electric won’t read it, a full refund within 30 days.
Models
Every Mitsubishi Electric control.
WiFiDrive goes in its USB port on every one.
M800VW Series
- M850VW
- M830VW
M800VS Series
- M850VS
- M830VS
M80VW Series
- M80VW
M80V Series
- M80V TypeA
- M80V TypeB
M800W Series
- M850W
- M830W
M800S Series
- M850S
- M830S
M80W Series
- M80W
M80 Series
- M80 TypeA
- M80 TypeB
E80 Series
- E80 TypeA
- E80 TypeB
C80 Series
- C80
The stick
What a Mitsubishi Electric asks of it.
- Loads a programRuns it from the stick in Front-side USB Memory Mode, as a main program or an M98 subprogram, or copies it into NC memory
- PortThe front-side USB port of the display unit, behind a cover; no hub or extension cable, and about 10 s after power-on before plugging
- Size and formatUp to 32 GB; it formats a stick FAT16 below 2 GB and FAT32 from 2 to 32 GB, and refuses a larger one
- Writes to itScreenshots as bitmap files, and the programs and data it outputs
- WiFiDrive’s layoutThe one it ships with
- Sourcesdl.mitsubishielectric.com, dl.mitsubishielectric.com (2), dl.mitsubishielectric.com (3), dl.mitsubishielectric.com (4), mitsubishielectric.com
Will it work with your Mitsubishi Electric?
If your Mitsubishi Electric reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.