SunStar · Industrial sewing
A WiFi USB stick for your SunStar sewing machine.
Copies patterns between a USB stick and the panel: VDT, .sew or .nsp files. WiFiDrive stays in its USB port, looks to the SunStar like any stick, and gets your patterns there over your own WiFi.
- Works as it ships: the SunStar reads it as is.
- Load a pattern from it as from any stick.
- If your SunStar won’t read it, a full refund within 30 days.
Models
Every SunStar sewing machine.
WiFiDrive goes in its USB port on every one.
SPS/G-B1201 Series
- SPS/G-B1201
- SPS/G-B1202
SPS/R (R - Pattern)
- SPS/R-2010H
- SPS/R-3020H
SPS/E Series
- SPS/E-1507
- SPS/E-5050
- SPS/E-8050
SPS/F Series
- SPS/F-2516
- SPS/F-3020
SPS/HT Series
- SPS/HT-5050B1
- SPS/HT-8050B1
The stick
What a SunStar asks of it.
- Loads a patternSPS/G-B1201/B1202: Communication copies a file from the stick into the panel under a file number you enter; SPS/R: Pattern Load switches to the U disk and replaces a same-numbered pattern in memory
- File formatsSPS/G-B: VD00xxx.VDT and ISMS0xxx.sew; SPS/R: [email protected], and it also reads B, BA, VDT, EMB, DST, DSB and DSZ, converting them to .nsp
- Writes backPatterns copied to the stick (SPS/R puts them in a dh_pat folder at the root); SPS/R parameter backup writes bakParam\backup.param and the version check writes version.png
- FormatNo file system or size rule is stated; the SPS/R panel takes about 5 s to recognize a newly inserted stick
- Older panelsSPS/E with the older panel and SPS/F-B1201 (old OP) use a CF card or floppy, not a USB stick
- WiFiDrive’s layoutThe one it ships with
- Sourcessunstar.co.kr, sunstar.co.kr (2), sunstar.co.kr (3), sunstar.co.kr (4), sunstar.co.kr (5)
Will it work with your SunStar?
If your SunStar reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.