OMTech · Laser cutters and engravers
A WiFi USB stick for your OMTech laser.
Its Ruida lasers copy an .rd job from a FAT32 stick under 16 GB into memory. WiFiDrive stays in its USB port, looks to the OMTech like any stick, and gets your jobs there over your own WiFi.
- Works as it ships: the OMTech reads it as is.
- Load a job from it as from any stick.
- If your OMTech won’t read it, a full refund within 30 days.
Models
Every OMTech laser and controller.
WiFiDrive goes in its USB port on every one.
Maker Series
- Maker MF1624-60
- Maker MF2028-80
- Maker MF2028-100
- Maker AF2028-60
- Maker AF2028-80
- Maker AF4063-150
Pronto Series
- Pronto 40
- Pronto 45
- Pronto 60
- Pronto 75
Pro Series
- Pro 2440
- Pro 3655
- Pro 3655 Hybrid
Polar Series
- Polar 2
The stick
What a OMTech asks of it.
- Loads a jobAn .rd file from RDWorks or LightBurn, copied into the panel's memory
- StickFAT32, under 16 GB
- Listed asUSB Flash Drive under Data Transmission; U-disk on the Polar 2
- ControllerRuida on the Maker MF and Pro 3655 (RDC6445GT5); KT332 on the Maker AF2028-60
- WiFiDrive’s layoutThe one it ships with
- Sourceshelp.omtechlaser.com, omtechlaser.com, omtechlaser.com (2), omtechlaser.com (3), omtechlaser.com (4)
Will it work with your OMTech?
If your OMTech reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.