Brother · Plotters and printers
A WiFi USB stick for your Brother.
Loads a garment print job from the stick into the printer, then prints it. WiFiDrive stays in its USB port, looks to the Brother like any stick, and gets your jobs there over your own WiFi.
- Works as it ships: the Brother reads it as is.
- Print or cut a job straight from it, as from any stick.
- If your Brother won’t read it, a full refund within 30 days.
Models
Every Brother plotter and printer.
WiFiDrive goes in its USB port on every one.
GTX300
- GTX300
GTXpro
- GTXpro B
- GTXpro
GTX600
- GTX600
- GTX600 Extra Color
- GTX600 Enhanced
GTX
- GTX
The stick
What a Brother asks of it.
- Loads a filePrint Data Load reads a job from the stick into the printer, which then prints it
- File systemFAT32, 2 GB to 32 GB in total, no password lock; the GTX300 refuses USB SSDs and UASP devices
- Folders and namesFolders are listed down to the 3rd level; deeper ones are not shown
- File typesBrother's own job files: ARX4 (GTX), ARXP or ARX4 (GTXpro), ARX6, ARXP or ARX4 (GTX600), ARX3 or ARXP (GTX300)
- Writes backLog copy to USB writes the printer's .log file to the stick; the GTX300 can format the stick as FAT32
- WiFiDrive’s layoutThe one it ships with
- Sourcesbrotherdtg.com, brotherdtg.com (2), brotherdtg.com (3), brotherdtg.com (4), brotherdtg.com (5)
Will it work with your Brother?
If your Brother reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.