A WiFi USB stick for your plotter or printer.
WiFiDrive stays in the machine’s USB port and looks to it like any USB stick. Your jobs get there over your own WiFi, from the office or the floor: no more walking the stick to the Graphtec, the Epson or any machine that reads one.
- Nothing to install on the machine: for it, this is a USB stick.
- Print or cut a job straight from it, as from any stick.
- If your machine won’t read it, a full refund within 30 days.
WiFiDrive works with your brand.
Check models, its photos and what its control asks of the stick.
Loads a garment print job from the stick into the printer, then prints it.
7 modelsBrother
Prints PDF and JPEG files from the stick; models with a scanner save scans to it.
56 modelsCanon
Prints garment jobs, images and drawings from the stick, picked on its control panel.
25 modelsEpson
GraphtecCuts a file from a FAT32 USB stick, picked on its panel or found by a printed barcode.
20 modelsGraphtec
Prints JPEG, TIFF, HP-GL/2 or PDF files from the stick; MFPs save scans to it.
37 modelsHP
Prints a garment job ripped to a .prn file on the stick, picked on its touchscreen.
4 modelsRicoh
SkycutCuts the data on a USB flash drive (U disk), as an alternative to a cable or WiFi.
20 modelsSkycut
TenethCuts a file saved on a U disk offline, with no PC attached.
44 modelsTeneth
USCutterThe Graphtec FC9000 it sells cuts jobs from a USB thumb drive without a PC.
USCutter
VevorCuts a job from a U-disk plugged into the cutter, with no computer attached.
5 modelsVevor
Will it work with your machine?
If your plotter or printer reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.