Fanuc · CNC mills and lathes
A WiFi USB stick for your Fanuc.
Its CNCs copy a program from the stick into memory and write programs back to it. WiFiDrive stays in its USB port, looks to the Fanuc like any stick, and gets your programs there over your own WiFi.
- Works as it ships: the Fanuc reads it as is.
- Run a program straight from it, as from any stick.
- If your Fanuc won’t read it, a full refund within 30 days.
Hartford
Photos and videos
WiFiDrive in Fanuc machines.
Hartford
Kao Ming KMC-2000SD
Models
Every Fanuc control.
WiFiDrive goes in its USB port on every one.
500i-A
- 501i-A
- 501iS-A
- 502i-A
- 502iS-A
- 503i-A
0i-F Plus
- 0i-MF Plus
- 0i-TF Plus
- 0i-LF Plus
0i-F
- 0i-MF, in our photos
- 0i-TF
30i/31i/32i-MODEL B Plus
- 30i-B Plus
- 30i-LB Plus
- 31i-B Plus
- 31i-B5 Plus
- 31i-LB Plus
- 32i-B Plus
30i/31i/32i-MODEL B
- 30i-B
- 31i-B
- 31i-B5
- 32i-B
35i-MODEL B
- 35i-B
Power Motion i-MODEL A Plus
- Power Motion i-MODEL A Plus
The stick
What a Fanuc asks of it.
- Loads a programCopies it from the stick into the CNC's program memory (DEVICE CHANGE, USB MEM); DNC and schedule operation and M198 calls cannot run from the stick
- FormatFAT12, FAT16, FAT32 or VFAT, formatted on a PC with a full format, not Quick: the CNC cannot format a stick
- Names and foldersUp to 32 ASCII characters per name, 6 folder levels below the root, 512 files and folders per folder
- One stickOne at a time, no hub; it is removed only when the status reads REMOVE OK
- Writes to itPrograms it outputs, and macro print output as PRNT0000.DAT to PRNT9999.DAT, overwriting a file of the same name
- WiFiDrive’s layoutThe one it ships with
- Sourcesfanuc.eu, fanuc.com, fanucamerica.com, fanuc.co.jp, servicetex.ru (dealer)
Will it work with your Fanuc?
If your Fanuc reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.