A WiFi USB stick for your CNC mill or lathe.
WiFiDrive stays in the control’s USB port and looks to it like any USB stick. Your programs get there over your own WiFi, from the office or the floor: no more walking the stick to the Haas, the Mazak or any machine that reads one.
- Nothing to install on the machine: for it, this is a USB stick.
- Run a program straight from it, as from any stick.
- If your machine won’t read it, a full refund within 30 days.
Haas VF-2 and VF-3Working in real shops.
Real WiFiDrive users in real mills and lathes.
WiFiDrive works with your brand.
Check models, its photos and what its control asks of the stick.
Moves NC programs, offsets and parameters in and out at the panel's USB port.
80 modelsDMG Mori
Its CNCs copy a program from the stick into memory and write programs back to it.
2 photos · 22 modelsFanuc
Runs a program straight from the stick, or copies it into memory.
11 photos · 4 videos · 86 modelsHaas
HartfordRuns Hartrol Premium over FANUC; FANUC's Load & Go loads programs from a stick.
1 photo · 84 modelsHartford
Kao MingShips a FANUC 0i control; FANUC's Load & Go loads programs from a USB stick.
1 photo · 44 modelsKao Ming
Copies programs between the stick and the control through its Data I/O screen.
69 modelsMazak
Its OSP control takes USB flash drives and can scan them for viruses first.
65 modelsOkuma
Will it work with your machine?
If your mill or lathe reads a USB stick, it reads WiFiDrive. If yours doesn’t, send it back within 30 days for a full refund.